Model：M-1
Features:
1. High stability: with high-quality laser source for stable and long-duration processing.
2. High-yield rate: specialized cutting model for airbag cushion materials.
3. Medium productivity: with high-quality laser tube to enable multi-layer cuts. (at least 6 layers)
4. Fully automated: feeding - spreading - laser cutting - collecting.
5. International standards: complied with UL / FDA / CE.
The Medium-Power Large-Format Laser Cutting System is designed for large-format processing with a practical balance of cutting capability and production efficiency. It supports a maximum cutting width of 3 meters and a maximum cutting length of 4 meters, providing a generous working area for large materials commonly used in airbag cushion manufacturing. This makes it well suited to medium-volume production where consistent quality and efficient material handling are required.
As illustrated in the main picture, materials are conveyed onto the spreading table via rotation of the automatic feeder. This automated feeding and spreading process helps position the material smoothly and prepares it for accurate laser processing. The maximum processing material size reaches 3 m × 4 m, allowing large-format materials to be handled within the system’s working range.
After spreading, materials proceed to the laser processing zone, where the medium-power laser performs precise cutting according to the required design. Once cutting is completed, finished workpieces are transferred to the material collecting platform, supporting orderly collection and smooth downstream handling.
This integrated workflow—from automatic feeding and spreading to laser cutting and finished-part collection—helps reduce manual intervention, improve production continuity, and maintain reliable output. It is extremely suitable for medium-volume production of various airbag cushions. With its large-format capability, medium-power laser performance, and efficient material handling design, the system offers a practical and dependable solution for manufacturers seeking flexibility and productivity. The followings are key points:
• Maximum cutting width: 3 meters
• Maximum cutting length: 4 meters
• Maximum processing material size: 3 m × 4 m
• Automatic feeder conveys materials onto the spreading table via rotation
• Materials proceed to the laser processing zone after spreading
• Finished workpieces transferred to the material collecting platform
• Medium-power laser for large-format cutting
• Integrated workflow for efficient and reliable production
• Extremely suitable for medium-volume production of various airbag cushions
Tension-free non-contact laser processing, no fabric stretching
Traditional knife cutting and die stamping will pull and deform high-strength airbag textiles. The laser adopts contactless cutting paired with a tension-free material feeder, keeping airbag fabrics flat without fiber elongation, ensuring consistent dimensional accuracy for critical airbag components.
Sealed, fray-free cutting edges for airbag fabrics
The high-temperature laser instantly melts and seals fabric cross-sections, eliminating loose yarn fraying along cutting edges. This avoids air leakage risks of airbags during deployment, fully meeting strict automotive safety standards.
Ultra-precise for mass automotive production
Stable laser positioning delivers high cutting precision on large-format fabrics (max 3m width & 4m length). Uniform cutting sizes across thousands of workpieces, zero mismatches during subsequent sewing and assembly of airbag modules.
No physical cutting molds, flexible for multiple airbag styles
No custom steel dies required unlike mechanical cutters. Simply import digital drawing files to switch between driver airbags, passenger airbags, side curtain airbags instantly, lowering mold costs for multi-model mass production.
Support large-format integrated cutting for whole airbag panels
Max 3m cutting width and 4m cutting length accommodates full-size airbag raw fabric rolls in one single continuous cutting pass, removing extra splicing procedures and reducing secondary processing errors.
High-speed continuous cutting optimized for large-volume output
Matched with automatic buffer feeding and full-length material collection platform, the machine runs uninterrupted for bulk airbag production. Far higher throughput than manual traditional cutting, greatly boosting factory productivity.
Digital nesting function maximizes fabric utilization rate
Equipped with built-in intelligent nesting software, the system automatically optimizes the layout of airbag component patterns on raw fabric. It effectively reduces blank spaces between cut parts, minimizes fabric waste and significantly cuts raw material expenditure during continuous large-batch production.
Compatible with all mainstream airbag raw materials
The laser system achieves stable, clean cutting on nylon, polyester, silicone-coated textiles and high-strength composite airbag fabrics. It delivers consistent edge sealing results without damaging functional coatings, covering nearly all substrate options adopted in modern automotive airbag production lines.
Golden Laser High-Power & Large-Format Laser Cutting System are mainly suitable for high-volume production of various airbag fabrics and cushion manufacturing. As we know, safety is the top priority for any automobile. Nowadays, an average passenger vehicle may be equipped with 6 to 7 airbags. For this reason, both high productivity and high-precision cutting are critically important for airbag fabric manufacturing. F-1 is generally applied in automotive industry, including the following materials:
| Types | airbags, airbag cushions |
| Materials | OPW - one piece woven (coated/laminated/X-tether) flat fabric (coated/uncoated/high-con) |
side airbag
driver airbag
passenger airbag
side curtain airbag(inflatable curtain)
front center airbag
| Laser Source | imported 300W-1000W CO2 RF laser optional dual laser head or single laser head |
| Laser Cutting Table | specialized U-shaped alloy working table with negative-pressure suction and exhaust system |
| Laser Cutting Area | 2.5-3.0m(W)×3.0-4.0m(L) |
| Spreading Area | 2.5-3.0m(W)×3.0-4.0m(L), same with laser cutting area |
| Collection Area | 2.5-3.0m(W)×3.0-4.0m(L), same with laser cutting area |
| Software | Golden Laser Exclusive Cutting Software & Professional Nesting Software |
| Control System | Golden Laser Self-developed Motion Control System |
| Drive System | imported servo motor drive and high-precision rack-and-pinion mechanism |
| Others | multi-layer spreading system, video monitoring system, fire alarm & auto extinguishing system, operator identity authentication system, MES data acquisition system, dashboard inspection station, exhaust gas purification system, etc. |
1. What’s the width and length of your cutting materials?
- To suggest you a suitable laser cutting area.
2. How many layers of your airbag cushion do you plan to process?
- To confirm which laser power to fulfill your production.
3. How large the occupation do you plan for the laser equipment?
- For matching the most proper machine model to meet your requirement.
Copyright © Wuhan Golden Laser Co., Ltd. All Rights Reserved — Privacy Policy
